May car wont move forward or backwards and the traction c...


May car wont move forward or backwards and the traction control light is on Mechanic's Assistant: Do you know the code? Did you check the fuses? I dont know the code... And i didn't check fuses.. It did this a few weeks a...

May car wont move forward or backwards and the traction control light is on Mechanic's Assistant: Do you know the code? Did you check the fuses? I dont know the code... And i didn't check fuses.. It did this a few weeks ago i had it towed.. And it started working normally without having it looked at by a mechanic Mechanic's Assistant: What is the make/model/year of your car? 2012 vw jetta Mechanic's Assistant: Are you fixing your Jetta yourself? What have you tried so far? Not much locked up on me in a burger king drive thru

Automotive Expert
Welcome to JustAnswer. Thank you for contacting us for assistance with your vehicle. I'm Pete. I will be happy to assist you with your question. May I ask to whom I have the pleasure of speaking with today?
Automotive Expert
I'm sorry to hear you are having this problem. I know this can be frustrating. Without knowing all of the information like the vehicle history, the components that have been tested or replaced, and the results of any tests that need to be run, I can only give you a general answer to your question. Please give me one moment to type out some info for you. I’ll be right back! Thank you for holding! The traction warning and the vehicle not moving can all be related to each other. This type of fault can be caused by a faulty wheel speed sensor, brake computer, or another anti-lock brake or traction control component. In order to be able to pinpoint the issue what needs to be done is to have a fully compatible scan tool plugged into your vehicle's data port that can read all of the computers in your vehicle to see if any fault codes are stored with this issue. Once this has been done, any codes that come up can then be diagnosed to help pinpoint and repair this issue. This will require the use of a high-end scan tool that can read all of your vehicle's computers. If you do not have a scan tool to check the fault codes yourself a shop or dealer can check the fault codes as well as diagnose the issue for about a 1-hour labor charge ( around $100 ). The cost to repair the problem varies as it depends on which component has failed that requires repair or replacement.
Automotive Expert
Glad I could be of some help! I hope everything works out well for you! If there are any additional questions on this issue that should arise, please feel free to reply and ask! Thank you for choosing Just Answer for your questions. Have a great day!

What others are asking

How do I cancel and resume cruise control?
You may want to cancel cruise control when you are in heavy traffic and then resume it again once you are back in an open area. You don’t have to completely re-set the cruise control if you use the cancel...
Door won't stay open
Hello. It is possible that the key is still in the ignition when you are attempting to lock it. An intermittent door lock actuator could also be the cause of this problem. Additionally, your door handle not working could be...
AC blows warm while idling, cools during driving
Hello. There are a couple of things that could be causing your problem. The purpose of the high pressure hose is to increase and decrease AC pressure during different driving conditions. If the a/c isn’t blowing cold air when the...
When engine is cold it studders and misses but when warm it runs juss fine no codes and engine light isnt on why is this happening
When an engine is cold it will need more fuel to run correctly. I would recommend having the fuel injection system cleaned (https://www.yourmechanic.com/services/flush-fuel-injector) to see if it helps to run better. If the flush does not work then a scan...
All lights are on dashboard. Brake lights will not go off.
I suggest beginning by fixing what is already known first. The brake pedal switch needs to be replaced. That switch does much more than just turn on the brake lights, and is possibly the root cause of all of this....
can I change my obd1 tbi engine to carbureted with hei vacuum advance distributor
Hello. If you want to change the ignition system to the old vacuum style system then yes, you will need to remove all of the electronics. The engine would need to have all of the sensors removed and a carburetor...
Is it expensive to replace the valve seals?
The usual symptom for bad valve stem seals is bluish white smoke out of the exhaust pipe when the engine is started cold. The smoke usually clears after a minute and doesn't return again until the car is shut off...
Signal lights quit working, shifter can't move
Hi. We will be happy to assist you. More than likely the wiring inside of the fuse box specifically the connectors where the fuses were blown have lost contact or melted. This is very common on your make and model of...
Total car system failure with the brakes not working properly, the accelerator not working, and the speedometer acting up all at the same time. Why?
The brake system (https://www.yourmechanic.com/services/brake-system-flush) is mechanical so you would want to check the brake fluid and make sure that it is full in the master cylinder reservoir. If the fluid is full, then either the fluid is full of moisture...