Exception in rendering!

Message: window is not defined

ReferenceError: window is not defined
    at new c (/tmp/execjs20161208-101665-qypchhjs:136:3912)
    at m.mountComponent (/tmp/execjs20161208-101665-qypchhjs:47:15602)
    at /tmp/execjs20161208-101665-qypchhjs:49:31860
    at a.r.perform (/tmp/execjs20161208-101665-qypchhjs:47:12503)
    at Object.a [as renderToString] (/tmp/execjs20161208-101665-qypchhjs:49:31821)
    at r (/tmp/execjs20161208-101665-qypchhjs:50:21164)
    at Object.S.ReactOnRails.serverRenderReactComponent (/tmp/execjs20161208-101665-qypchhjs:32:6073)
    at eval (eval at <anonymous> (/tmp/execjs20161208-101665-qypchhjs:173:8), <anonymous>:10:23)
    at eval (eval at <anonymous> (/tmp/execjs20161208-101665-qypchhjs:173:8), <anonymous>:17:3)
    at /tmp/execjs20161208-101665-qypchhjs:173:8

Q: Valve manifold is stuck

asked by on

The valve is stuck open. How do I fix the problem?
My car has an automatic transmission.

A: Hi there. The only thing that you can do i...

Hi there. The only thing that you can do is remove the upper intake manifold runner control and replace it with a good used one or a new one. If you need further assistance removing the intake manifold runner control, then seek out a professional, such as one from YourMechanic, to help you with the process.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Save up to 30%

Get a quote

What others are asking

Q: Motor idles fine, when you give it gas it bogged down, already changed the plugs,wires,distributor cap and rotor

Hi there, thanks for writing in about your Chevrolet C1500. It's highly likely the mass airflow sensor is bad. To verify, a scan tool should be connected and observe voltage changes in the mass airflow sensor readings. Same for oxygen...

Q: I moved my truck and it started fine. Went to get back in it and it wouldn't start just a faint single click.

You may have a problem in your wires somewhere. If you have a wire short it could possibly cause this. However, you may have a faulty part. Look for wires around your starter that may be touching the frame. Is...

Q: Cylinder 2 misfire

You need to pull out the coil and check to see if there is oil in the spark plug hole, or on the plug wire boot. If there is, then replace the valve cover and spark plug boots after cleaning...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the P0052 code means This code is seen when the Engine Control Module (ECM) tries to control the...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.