Where can I get LED lights and indicators

It sounds like your engine may be seizing up due to low oil. I would first recommend checking the engine oil to ensure its proper level. If the oil is low this could be your problem. If the engine is...

Hello. Your brakes can make noise for any number of reasons. The noise may even be coming from another part of the vehicle. If the noise occurs anytime the vehicle is moving then you may actually have a failing hub...

Hello. There are a few things that can cause this. If the smoke is white then you may have a blown head gasket. This is a common failure on this vehicle, especially if it has ever overheated. If the smoke...

This may be related to a faulty blower motor or blower motor relay. Occasionally, the blower motor itself will wear out or become faulty working intermittently as the bruch contacts inside the motor wear out. The blower motor relay (https://www.yourmechanic.com/services/blower-motor-relay-replacement)...

I believe you may be having a problem with your oil pressure sending unit. This is the part that is responsible for sending a signal to your oil pressure light. If no pressure is sensed by the sending unit, the...

Hi There, Unfortunately, there is no way to tell whether or not the fix kit will hold it and for how long. Depending on the severity of the crack and the location of the crack it may last for a...

The problem sounds like you either have worn bearings or brakes. This will cause loss of power and noise would stop when vehicle is not moving. Have the front brakes and bearings checked by a mechanic like one from YourMechanic...

Hi there. Typically when an engine shuts off while under acceleration, it is caused by an instant reduction in fuel flow or an ignition system component that failed. Among the leading candidates include, fuel pump failure, fuel pump relay, or...

Hi Valerie. Thanks for contacting us tonight. When you have electrical fuses that continually blow, it means you have an electrical short or an open electrical relay that is the root issue. The best way to determine where the fault...