Q: suzuki ltr450 moves on its own

asked by on

my ltr450 is proprely idleing and has a good mixture. but when i put it in 1st gear it starts rolling on its own without any throttle . it can go up to 20mph without throttle
My car has a manual transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. suzuki ltr450 moves on its own

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: New tension belt was put on and the car will not start. The car computer is saying the timing belt is off.

Hi there. The serpentine or drive belts have nothing to do with the timing belt on the car. It depends on the tensioner that was installed, either the drive belt tensioner or the timing belt tensioner. I recommend seeking out...

Q: Random exploding sunroof is unsafe

Hello, A moonroof (commonly confused with sunroof) is a retractable glass pane rather than a retractable piece of metal (sunroof). Since the glass broke it would be difficult to determine if there was an impact that would have caused it...

Q: Q: Starts but won't stay running

This may be caused by many different things such as low fuel pressure, low voltage to the fuel injectors, dirty fuel injectors, a vacuum leak, a faulty Oxygen sensor or a dirty or failing idle air control valve. Any of...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...