Q: Where is the steering sensor in my 2014 Dodge Ram 1500

asked by on May 26, 2017

Where is the steering sensor located at on Dodge Ram 1500 hemi 2014 n how do u recalibrate it an how do you replace it an reset it

Hello. The steering sensor is located in the steering column of your vehicle. This sensor can be replaced by dismantling the column and then once the new one is installed you would need a factory scan tool to calibrate it and the vehicle should be aligned at the same time. This should be done at the dealer.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $65/hr

What others are asking

Wheels alignment

Hello. I'll be glad to help you with this. On a straightaway, at speed, with no significant crown on the road, if the car is properly aligned, you should be able to remove your hands from the wheel and the...

The car makes noises while making a turn to the left

Depends on where the noise is coming from on your Mercedes C320. If it is from the front end, then it is likely a worn suspension component such as a sway bar link or a steering component like a tie...

there is a loud rattling noise that sounds like its coming from transmission and only does it during acceleration and higher RPMs

It's possible the code(s) stored when the check engine light came on might provide some clues although your onboard diagnostics system is an early version (OBD-I) and so the data reported is not very detailed. Nevertheless, a first thing to...

P0480 trouble code

Hello. Typically this is not an issue with the relay. There have been some issues with the programming within the control computer that causes the fan to not work right which will cause this code. Being that the vehicle is...

What will I need to change my fpr on my 96 Chevy Silverado 5.7 liter? I appreciate any advice and understand if you don't want to

It takes a mechanic about 2 hours. The main thing you have to keep in mind is gasoline is flammable and the vapors can accumulate and explode. You have to be mindful of even your shop light, and static electricity,...

Intermittent stalling while idle or driving

Hello there. Many common faults can cause your 1994 C1500 to have intermittent stalling when driving. You have done well in replacing the injectors, fuel pump, and other sensors as well as the plugs and wires, as these are typical...

Control arm

Hello. It would not be a bad idea to change the camber kit and control arm at the same time, as these components usually wear together. A faulty camber arm can indeed cause accelerated wear on control arms and other...

Do I need to repair or replace my ECM?

You can get an ECM-related code for a number of different reasons. It can be something as simple as a voltage loss from a bad battery connection, or it may need a new ECM. I usually check the codes and...

Car shakes when I press accelerator

This may be a sign of a failing throttle position sensor. The throttle position sensor (TPS) is a sensor used to monitor the throttle position of the throttle plate inside the throttle body in relation to your foot position on...

Related articles

Symptoms of a Bad or Failing Steering Rack/Gearbox
Common signs include a very tight steering wheel, leaking power steering fluid, grinding noises when steering, and a burning oil smell.
Symptoms of a Bad or Failing Flex Coupling Steering Damper
Common signs include excessive vibrations in the car and steering wheel play or lock up.
Is It Safe to Drive With a Broken Sway Bar?
Your car’s suspension is very complex and requires a number of different components to provide the handling and performance that you need. One...