Q: Is it safe to use snow cables that are for wheels that are 1" smaller.

It does not sound very fun to drive your vehicle right now! Your Fusion uses an electrically assisted power steering system, rather the standard hydraulic power steering system that is found on most cars. After doing some research on the...

Check fuse number 11 in fuse box to see if it is blown. Check all fuses in engine and interior fuse boxes for any blown ones. You may need to try disconnecting the engine control module and reconnecting it with...

Hi there. The code is on for multiple different sensors that you would need to check. Check for a faulty Crankshaft position sensor, a faulty Camshaft position sensor, a faulty intake valve timing control solenoid valve, or a faulty intake...

Hi there. Your issue is the ECT (https://www.yourmechanic.com/services/coolant-temperature-switch-sensor-replacement) sensor B is not closing the loop when engaged. There is power to the sensor A from the computer, but the sensor B is not connecting when the vehicle is running hot...

Hi there - while adding ground pepper to a leaky cooling system (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-radiator-hose) may stem a leak, this would seem to require a great deal of pepper! Other "cooling system sealers" may stop a slow leak, but tend to put...

Hi There, It sounds like you may have some burnt clutch plates that may be causing the clutch slipping (https://www.yourmechanic.com/services/clutch-is-not-working-inspection). Your clutch is essentially a spinning disk attached to the transmission's input shaft (the shaft that feeds power into the...

Hi There, Overheating with the AC on is generally caused by a couple of possibilities. When the AC compressor (https://www.yourmechanic.com/services/ac-compressor-replacement) is beginning to fail, this may incur an increased load on the motor as it works harder than usual to...

Hi Gina. If you just had an accident, the first thing you should do is contact your insurance company and file a claim for the accident. They need to officially file this before the vehicle is inspected for damage and...

Hi Sheca. Unfortunately, when you have aftermarket conversions completed, you'll have to consult with the mechanic or company that completed the service. We do not offer technical assistance on these services, only OEM service, maintenance and repairs for US sold...