Q: Shaking at 16-19 MPH or when turning

asked by on

shaking at speed 16-19, 0r when I turn again at low speed

My car has 68000 miles.
My car has an automatic transmission.

From what you’ve described, it sounds like your engine mounts are bad. At low speeds your engine will shake until you reach higher speeds. To fix the problem, you will have to get the engine mounts replaced. To avoid any unnecessary repairs, have one of our certified technicians diagnose the shaking you’re experiencing and replace your engine mounts as necessary. Best of luck.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Shaking at 16-19 MPH or when turning

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Why does my automatic Honda CR-V make a clicking sound when I turn the ignition

If your vehicle is not starting, the clicking noise may just simply be from a relay in the ignition starter circuit and/or the solenoid. If your car is not starting, the best thing to do is request a no start...

Q: When i drive over a dip in the road theres a vibration/grinding in the pedal and car.also when car leans right it does.

A possibility is the motor/transaxle mounts are worn or sagging and that causes misalignment of the CV axles accounting for the noise and vibration. However, that is just one possible scenario. Vibration under acceleration could also be due to an...

Q: Q: How do you inspect the seat belts?

Like most other components of your car, you should regularly inspect your seat belts to ensure that they’re in good condition and don’t pose a threat to your safety. Here’s what you need to do: Pull the belt out...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...