Q: Replacing the EGR tube

asked by on April 13, 2017

I'm replacing the EGR valve and tube, and everything went very smooth, which should have been the first sign that something was wrong. I'm getting gas (emissions kind, not the fuel kind) around the connection of the tube to the manifold. I could possibly tighten the fitting more, but I'm already at the point where I'm concerned cranking on it harder will cause damage. Is there some type of sealant that I was supposed to apply before I tightened that fitting on?

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

How do I adjust the height of the rear view mirror?
Adjusting the height of the rear view mirror ensures it’s in the correct position to see vehicles behind you. Just move the mirror up or down with your hand to make the adjustments. Make sure you can see behind your...
How do I quickly heat the cabin of the vehicle?
If it is cold inside your car’s cabin, you can use the climate controls to quickly heat up the car. To heat the cabin quickly, follow these quick steps: 1. Use the fan control dial to set the fan speed...
AC Blower not Working
The most common failure for this problem is the blower control module (also known as the linear power module). The module should be replaced with a new one, after which you may notice the blower speeds higher than they were...
It sputters bad when i hit the gas pedal to hard and want to die
When an engine is cold, it needs to have rich fuel condition to run. Only when the engine has warmed up can it run at full power and efficiency. The thermostat not only keeps your motor from overheating, but it...
my car wont crank after i replaced the radiator
Hi there. Most of the time, the issue you're experiencing is caused due to an electrical short that occurred while the radiator was being replaced. One of the first lessons we're taught in automotive technology is to always disconnect the...
Any problem will occur in engine performance? Running long time with ABS light warning.
Hi, thanks for writing in. I'd be happy to help. An ABS fault will not effect engine performance. It will however, effect the anti-lock portion of your brakes. Your brakes will function like normal brakes except in slippery conditions or...
I have a 2004 Mercedes Benz E320. Car will not start. No crank either. Battery checked out fine.
Hi, thanks for writing in. I think your best bet would be to have a technician check the vehicle. The shifter issue may be either the brake light switch, or the transmission control module. It can all me related to...
F20B engine felt and sounded like it scraped against something while driving. Now the car cranks but won't start.
The scraping noise was the timing belt rubbing on the timing cover. The issue could be the timing belt may have jumped a tooth. This will cause the engine to have a no start condition. Check the timing on the...
Coolant
You should keep the coolant full at all times making sure to be careful topping off coolant when engine is hot. If you notice engine running hot you should stop and let the engine cool before adding more coolant or...

Related articles

2012 Toyota RAV4 vs. 2012 Ford Escape: Which One Should I Buy?
SUVs (Sports Utility Vehicles) are a fun class of vehicle to drive – with their generally excellent handling on the road, their quick acceleration, and the ability to move a fair number of people while still looking pretty cool, they...
The Best Used Cars to Buy If You Need a Lot of Trunk Space
Many Many people focus more on interior room than cargo carrying capacity. That’s natural if you have a large family or regularly carpool, but what about drivers who need to carry a lot of stuff most of the time and...
The Top 5 Selling Cars in Alabama in 2012
2012 2012 was a great year in Alabama for auto manufacturing, but that wasn’t the only bright spot. Vehicle sales in Alabama were also robust in 2012. Nothing much changed in terms of the vehicle types that were most popular...