Q: Problems with convertible top and power seat

asked by on

The convertible top doesn't go completely down. Also, the driver's side seatbelt doesn't retract and the power seat does not move forward or back.

Hi there. Sounds to me that your vehicle’s top is a bit off track. This is the same concept as a window being off its track. It will neither close or open all the way. To ensure precise diagnosis, have a certified technician, such as one from YourMechanic, further inspect your car’s convertible top and power seating issues.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Problems with convertible top and power seat

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Car oil needs to be refilled before oil change is due

Hello. If you are losing oil, it is either leaking or being burned. The causes of burning oil would be faulty piston rings that allow the oil to blow by into the combustion chamber or bad valve guide seals that...

Q: Hello I have a 2004 Nissan Murano SL and I do not know how to loosen up the V-belt tensioner or also known as drive belt tensioner.

Hi there. To remove the v-belt from the engine perform the following: Loose the drive belt tension by turning adjusting bolt next to the power steering pump Remove the drive belt from the power steering pump and crankshaft Loosen...

Q: Q: How do I adjust the height of the head restraints?

The head restraints are an important safety feature in your car’s front seats. They help protect your head and neck in the event of an accident. To increase the height of the head restraint, simply pull straight up on the...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.