Q: Problem bleeding my brakes , can't get it to bleed out

asked by on

Changed the front pads on it , had to open bleeder on lf wheel now I can't get no fluid out . I been trying two days now don't no what else to do

My car has 145000 miles.
My car has an automatic transmission.

You will need to use a scanner to activate the ABS bleed function. If you still cannot get fluid out of any brakes then you may have a problem with the ABS module. The bleed function should work unless there is a blockage in the system.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Problem bleeding my brakes , can't get it to bleed out

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Transaxle light coming on

With the engine fully warmed up and running in PARK, open the hood and look for the transmission dipstick. Pull it out and give it a wipe. Dip it back into the tube and pull it out, this time noting...

Q: Rethreaded my spark plug and may have dropped some small metal shavings in the plug hole is there a way to get them out

The only thing you can do to get out the metal shavings from the cylinder without removing the cylinder head is to use a long air hose pressure probe into spark plug hole and blow air into cylinder to try...

Q: Will I have to take out the whole transmission or apart just to get to to that piece (transmission speed sensor

The output speed sensor is replaced from outside the transmission and is located on rear of transmission. No need to remove transmission.

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.