Q: Power steering leaking

asked by on

The power steering is leaking.

Hello. It would first be necessary to pinpoint where the leak is coming from by doing a power steering system check. Once the origin of the leak is found that component would need to be replaced. I recommend having a certified mechanic inspect your vehicle and then properly addressing these repairs.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1,000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Power steering leaking

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Bronco not staying started after sitting

If your vehicle has been parked for that long, draining the fuel and changing the filter might be a good idea. But if it is running for 45 minutes, this is probably not the issue. When a vehicle runs for...

Q: Engine turns off when the first gear is shifted

Hello. The most common cause of the car dying once it is put into gear is the transmission torque converter or the fluid level of the transmission. If there are leaks present from the transmission, I would suspect the fluid...

Q: Steering does not respond properly, do i need to replace the gear box?

As you know, the sway bar connects suspension components on opposite sides of the vehicle. The stabilizer bar should be checked for stiffness. This causes side-to-side motion in the car which affects steering and handling of the vehicle. Failure to...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...