"Hi, I'm Roy. Welcome to JustAnswer. I'm reviewing your question now, and will post back with your reply momentarily."
You will see an option to receive a phone call prompted by the website, you can agree to or decline. If you do not wish to use the Phone Service, we can continue chatting this way back and forth until you are satisfied with my help. Who Am I speaking with today ?
Hi! Hope I can help sorry to hear about your power steering issues , what is happening are you getting noise or hard steering ? let me know Thank you Roy!
Customer
343 days ago
Retha
Roy Sheidenberger
343 days ago
Automotive Expert
Hi! Retha let me know what is happening
Customer
343 days ago
Hard steering
Roy Sheidenberger
343 days ago
Automotive Expert
are you getting noise also ?
There is a pressure solenoid on the steering rack that controls the pressure and power assist . that can fail and cause issues
Customer
343 days ago
I was getting pressure hose was changed.
Roy Sheidenberger
343 days ago
Automotive Expert
Okay if changed it must have had a leak at one time they can leak at the high side pressure hose
Customer
343 days ago
The pressure hose was changed today due to a leak.It isnt making noise now but very hard to steer
Roy Sheidenberger
343 days ago
Automotive Expert
If not leaking could be a solenoid issue
Roy Sheidenberger
343 days ago
Automotive Expert
control system operation
Roy Sheidenberger
343 days ago
Automotive Expert
I would use a scan tool and check the solenoid operation
Before you start replacing more parts I would have it inspected correctly could be a electrical issue also .
Roy Sheidenberger
343 days ago
Automotive Expert
Let me know if you have any questions, just post back to me Thank you Roy!
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
When your car is turned off, the steering wheel will sometimes lock as a safety precaution. During this time, the steering wheel will barely move, and the car cannot be turned on. To release the steering wheel lock, insert the...
The fog light provides added visibility when you are driving in foggy or misty conditions. To turn on the fog lights, rotate the Fog Light switch (located on the turn signal lever) to the on position.
Hello. More than likely, the hose clamps are loose or they are not in the right position. This would cause coolant to spray everywhere. It may also be necessary to replace the hose clamps you have now with new ones....
The rear ABS sensor is mounted in the top of the rear differential. I am not sure if your question is about rust in your engine? Can you clarify the question? You also mention a problem about the engine dying...
This problem of a slight jerk feel is what is known as a lean tip in surge. The cause can be an indication that the engine is running lean and may be caused by dirty injectors, throttle body, air filter,...
There are many reports about this issue with your truck. I have access to IATN (International Automotive Technicians Network) and the consensus is everything on the front of the motor needs to be replaced. Which is a very, very large...
Hi there. If you can turn on the engine, then the engine did not lock. This could be a cause of the transmission having an issue. Check the transmission shifter cable (https://www.yourmechanic.com/services/shift-selector-cable-replacement) to see if it has broken or came...
The only reason to replace the evaporator would be if the evaporator were physically blocked internally or if it is leaking refrigerant. Be sure to obtain tangible proof of either circumstance. Verification is particularly important because evaporator leaks, except at...
Hi there. Sometimes the material of the contact on a sensor can produce a false reading or not correctly connect to the electrical harness; so if your trying to test the sensor to see if it works, and the OEM...
What else could cause power steering problems ...
What else could cause power steering problems