Q: My car is jerking and hesitating when accelerating

asked by on

Hi, my name is safwan and i had innova car. After the day i service that car, my car got jerking suddenly and i can only drive from 70km/h to 60km/h till 20km/h. While jerking... when i push the accelerate pedal ...the jerking going more bad and the meter also not increase.

My car has 140000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. My car is jerking and hesitating when accelerating

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: my car would stall if I turn on the A/C while idling at a stop... sometimes it would run fine until the engine is not warm

Hello. Most of the time this is caused by a failing air flow sensor or an issue with the throttle body. The throttle body tends to get dirty which causes the throttle plate to not function properly, causing a low...

Q: Rough acceleration and sputtering

The regulator is mounted to the fuel filter housing where the fuel line goes in. You may have a bad injector or two that is causing the problem you are having. The injectors on these engines had issues that are...

Q: The car hesitates and jerks during quick acceleration

It sounds like you may be experiencing an issue with your fuel system. The fuel pressure regulator is one of the parts responsible for maintaining your fuel pressure at all rates of engine speed. Most fuel pressure regulators are controlled...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...