Q: Misfire in cylinder one

asked by on October 14, 2017

I have a misfire in cylinder one replaced plugs wires checked for leaks and checked coils I heard these fuel injectors in these cars don't go bad but that's the only other thing I can think of what do you think

My car has 9999999 miles.
My car has a manual transmission.

Engine is misfiring Inspection $94.99 - $114.99 Get a Quote

Engine misfires can be caused by many different problems and are generally caused by either a spark or fuel issue or in some cases, a combination of both. Spark related problems generally will result from things like ignition coils, crankshaft position sensor, spark plugs, spark plug wires or ignition modules not working properly. When the misfire results from a fuel related issue, this is commonly related to a lean fuel condition (lack of sufficient fuel supply to the motor). Fuel related misfires can be caused by many different things such as low fuel pressure, faulty or dirty fuel injectors, a faulty O2 sensor, a dirty or failing mass air-flow sensor, a faulty or dirty idle air control valve or a vacuum or intake leak. When the fuel supplied to the combustion chamber is insufficient, this results in an ignition (spark) that is igniting a less than balanced load of fuel and air. This results in a misfire or an explosion in the cylinder that is much less powerful than the other cylinders. This creates a loss of power that resonates throughout the motor additionally causing other problems with ignition and fuel timing. Due to the number of different things that may cause an engine misfire, the quickest and easiest way to diagnose this type of problem is to hook the vehicle up to a scanning tool which will download any potential fault codes that may have registered in the vehicle’s computer as a result of the poor running condition. I would recommend having an expert from YourMechanic come to your location to diagnose and inspect your vehicle.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Front low-beam headlight repair requires whole light assembly replacement
Hello. For your 2009 Saturn Outlook, there is an aftermarket part called a pigtail connector that can be spliced into the existing wiring fairly easily. You may be able to find instructions on the internet that would be able to...
Isn't the timing belt suppose to be changed at 90,000?
I would definitely recommend changing the timing belt (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-timing-belt) at the 90,000 mile recommended interval. As you may know, the timing belt keeps your engine's critical components in sync. Fortunately, this model does NOT have what is called an "interference"...
Hard to press brake
Hello. This is caused by a bad brake vacuum booster (https://www.yourmechanic.com/services/brake-booster-vacuum-pump-replacement). When the booster fails, the brakes will get hard and it can cause a vacuum to leak in the engine causing a misfire. It sounds like this is what...
Chirping in motor. Not a pulley or belt. Took the belt off and still squeals.
Hi, thanks for writing in. It is likely that an engine overhaul or replacement would be necessary if the engine is making the same noise that a bad serpentine belt would make. This could be piston rings scratching against the...
Idle issues or MAF sensor? 2001 Nissan Maxima
The idle air control valve monitors the air intake as it is mixed with fuel prior to being injected into the engine. This valve is controlled by the vehicle's computer which will adjust idle speed based upon other measurements such...
Error code 171
Hello. If you are referring to trouble code P0171, then there may be a few different potential causes. P0171 is the trouble code for a lean condition at bank 1 of the vehicle's engine. A lean condition occurs when the...
Flashing check engine light after repairs
Hello Stephanie, thank you for writing in. Unfortunately your situation is complicated, and resolution may not be as easy as we would like. Due to the repairs they performed pertaining to the fuel, spark, and cooling system, it is difficult...
Can't find ebrake release
Hello. On this particular vehicle the e-brake will not engage the standard way of pushing it all the way to the floor after it is engaged to make it release. There will be a little lever to the left of...
Valve cover leaking on to exhaust manifold gasket can that make it blow white smoke and make CEL flash
You may have piston rings leaking compression into the crankcase causing the problem and will need to have a compression and pressure test to the cylinders to see what is leaking.

Related articles

A Buyer’s Guide to the 2011 Mazda Tribute
2011 2011 marked the final year of production for the Mazda Tribute, a compact SUV that shared a platform with certain Ford models. The Tribute managed to combine relative affordability with decent performance and a modicum of comfort while driving...
The Best Used Cars to Buy If You’re a Wedding Planner
As As a wedding planner, the demands placed on your time are going to be significant, even if you’re only dealing with one or two couples. You need to be a master juggler when it comes to your time and...
The Best Used Cars to Buy If You’re Shorter Than Average
Vertically Vertically challenged? Hate getting behind the wheel and having to crane your neck to see? There’s nothing wrong with you, but there is something wrong with your car. It might be time to trade it in and take advantage...