Q: Mi compressor de aire no enciende

Fluids in your engine all look and feel different. Coolant is very thin, somewhat clear no matter the color and oily. When the car is running the cooling system is under pressure and if a leak develops it will certainly...

Hello! That is a common problem that unfortunately usually requires a replacement of the instrument cluster. The clusters will short out internally over time, due to faulty solder points. The solder points will usually fail due to the heat those...

It is possible that the play you are feeling in your steering wheel may be related to worn out wheel bearings (https://www.yourmechanic.com/article/symptoms-of-bad-or-failing-wheel-bearings). The wheel bearings may not be noticeable in the steering wheel when the vehicle is stopped or parked,...

This may possibly be a faulty fuel tank sending unit (https://www.yourmechanic.com/parts/fuel-level-sending-unit). This is a float type designed sending unit that sits inside your fuel tank that monitors the fuel level inside the tank. When this is faulty or failing it...

Hey there. If after replacing all those items, the cylinder #6 misfire code remains, then there are a few other possibilities. This could possibly be a fuel injector fault. The injector can be clogged or simply worn from age and...

First you will need to test compression on all 4 cylinders with all of the spark plugs out and the ignition system disabled. If the compression is good on all of the cylinders, then the valves in cylinder 2 are...

You can certainly use transmission stop leak, however depending on how bad the leak (https://www.yourmechanic.com/services/transmission-fluid-is-leaking-inspection) is or the amount of pressure coming from the leak, this may be only a temporary fix. I would suggest having a professional from YourMechanic...

Hi there. P0700 is set (https://www.yourmechanic.com/article/p0700-obd-ii-trouble-code-transmission-control-system-malfunction-by-spencer-clayton) when the PCM detects a malfunction in the transmission control system. This malfunction causes the vehicle to set a Check Engine Light and trigger a failsafe mode. Once the failsafe mode is set it...

The only way to bypass compressor is to install a compressor bypass pulley in the same position as compressor. I can tell you that these kits are more expensive than replacing the compressor itself and just getting the a/c to...