Brake, abs and antilipt light are on
Responses
Mike V.
262 days ago
Hi, my name is\*\*\*\*\*’ve been a technician on Just Answer since 2007 and I'll be helping you today. I'm sorry to hear you are having difficulties with your vehicle. I know how inconvenient car trouble is, but together, we will get your vehicle back up and running quickly.
Start by checking the brake fluid level, if it's low it can cause these lights to come on.
If the brake fluid level is good, then you will have to have the car scanned for codes in the ABS or traction control system. These all work together which is why all 3 lights are on.
Once you have a code, then you know where to start looking. There are several sensors, wheel speed sensors, steering angle sensor, yaw rate to name a few, this is why the codes are important.
Customer
262 days ago
Thank you Mike, very helpful your comments
Mike V.
262 days ago
You're very welcome.
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
How do you replace a fog light bulb?
If your car is equipped with fog lights (not all Civics have these), they provide you with enhanced visibility when driving in foggy or misty conditions. However, like all other bulbs on your car, they’ll eventually burn out and need...
How should pregnant women wear a seat belt?
Like all other drivers and passengers, pregnant women need to buckle up while on the road. Of course, it’s important that they wear the seat belt correctly, or they could injure themselves or their child. Here’s how to wear it...
Car makes clicking sound when engaging gear and also while driving on low speeds
Hi there. The clicking sound when you change the gear from 'P' to 'R' sounds like it could be either a motor mount (https://www.yourmechanic.com/services/engine-mount-replacement) or a worn CV joint (axle) (https://www.yourmechanic.com/services/axle-cv-shaft-assembly-replacement). I'm inclined to lean more to the axle with...
Fault codes P0098 and P0238 - 2011 Volkswagen Golf
Hi there. The two OBD-II error codes you posted including the P0098 OBD-II Trouble Code (https://www.yourmechanic.com/article/p0098-obd-ii-trouble-code-intake-air-temperature-sensor-2-circuit-high-by-jay-safford) and the P0238 code (https://www.yourmechanic.com/article/p0238-obd-ii-trouble-code-turbocharger-boost-sensor-a-circuit-high-by-jay-safford) are similar in many ways. The P0098 code (https://www.yourmechanic.com/article/p0098-obd-ii-trouble-code-intake-air-temperature-sensor-2-circuit-high-by-jay-safford) indicates that there is an issue with the intake air...
Since mechanic changed engine oil on dashboard flashes service engine soon
The variable valve timing VANOS system on your car can become sticky over time. Particularly if you are not changing the oil diligently. It is a hydraulically operated device that advances the camshaft using engine oil pressure under certain conditions....
Clunking noise from the rear passenger side when going over uneven roads or bumps.
Hi there. It appears you've done a pretty good job of diagnosing a possible problem with either your rear strut or rear stabilizer bar. It's common for struts and stabilizer bar bushings to wear out first among suspension components (especially...
How much for an oil change, battery change and alignment cost?
Billing question sent to CS for the cost of replacing the battery, changing the engine oil, and performing an alignment.
VERY ROUGH IDLE STALLS WHEN PUT IN GEAR
Hi there. The idle speed of an engine is basically the rotational speed the engine runs on when it is un-coupled from the drive train and the throttle pedal is not being depressed. When an engine is running at idle...
my alternator as failed twice and i think due to oil leaking into it. i had the valve cover gaskets changed and i'm still getting
Hi there. It is possible for oil to soak into electrical components of an alternator and cause it to fail prematurely. If the oil leak still exists after completing the recent valve cover gasket changed, it's possible that the source...
Browse other content
Services
Estimates
Maintenance
Brake, abs and antilipt light are on Mechanic's Assistant: Is it just the ABS light? Or is the brake system warning light on, too? The three of them are on Mechanic's Assistant: What is the make/model/year of your...
Brake, abs and antilipt light are on Mechanic's Assistant: Is it just the ABS light? Or is the brake system warning light on, too? The three of them are on Mechanic's Assistant: What is the make/model/year of your car? Mazda 3 11 2011 Mechanic's Assistant: Are you fixing your Mazda 3 yourself? What have you tried so far? I have checke the fuse box Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? I am trying to find out the answer by my own