Q: Just replaced my timing and now it won't start I have spark fuel and air

asked by on

My 2008 suzuki xl7 won't start after replacing my timing I have spark fuel and air wat do I do?

My car has 104000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Just replaced my timing and now it won't start I have spark fuel and air

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: would skipping an oil change cause a P0008 code

Diagnostic Trouble Code P0008 sets when the engine control module (ECM) detects an out of range variation in the mechanical timing of the crankshaft and the camshaft. The crankshaft and camshaft(s) are normally moving in a fixed position, relative to...

Q: why won't my overdrive work

Hi there. The overdrive clutches in the transmission could be slipping causing the transmission not to shift into overdrive. I recommend seeking out a professional, such as one from Your Mechanic, to help you diagnose your transmission.

Q: I have a 2007 Suzuki forenza.when I turn the key on fuel sprays from tops of injectors. Any advice?

Leaks from fuel injectors are typically at the o-ring connection on the fuel rail. When you install the injector o-ring, you have to use a liberal amount of engine oil and twist the o-ring in along with the injector. Also,...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...