Q: I put a new belt on my 98 Taurus...now it's a squeaky noise..I think from the pulley can this be fixed

asked by on August 25, 2017

I put a new belt on my car..and now it's a loud noise coming from ..I believe the pulley...is this possible..and how can I fix it.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

How do you change zones on the compass?
Your compass is designed to work on a “zone system” due to the fact that that magnetic north and true north are not always the same (it depends on where you’re at on the face of the planet). The good...
My car has no electrical power and there is a blown 80 amp fuse under the hood
It sounds like you have a ground issue. Check the ground wires from the battery to the fuse box. Make sure that the cables are tight and free of corrosion. Check the condition of the battery terminals for corrosion and...
I put it in reverse and it went forward. I then put it in drive and it went in reverse. Why would this happen?
Hi and thanks for contacting YourMechanic. Check the shifter cable (https://www.yourmechanic.com/services/shift-selector-cable-replacement) to the transmission and make sure that the cable is hooked up correctly. What seems to be happening is either the shifter cable is not attached to the transmission...
What is an ECM-relay and where is it located?
Hey there. The ECM relay on this vehicle is called an auto shutdown relay (https://www.yourmechanic.com/services/automatic-shutdown-relay-replacement) and is located in the engine compartment integrated power module control box. The P0052 (https://www.yourmechanic.com/article/p0052-obd-ii-trouble-code-ho2s-heater-control-circuit-high-bank-2-sensor-1-by-spencer-clayton) code you are getting is for the passenger side O2...
Engine takes too long to warm up runs poor until it warms up.
There is only two possible causes of an engine running colder than it is supposed to. The fan clutch may be locked up and would cause a load on the engine and excessive airflow across the radiator not allowing the...
What years ignition module will fit my 1991 Chevrolet Silverado 5.7
Hi - GM V8 ignition control modules from 1987 to 1995 should interchange with your '91 5.7L. For assistance, I recommend a ignition control module replacement (https://www.yourmechanic.com/services/ignition-ignitor-replacement) performed by a mobile, professional mechanic, such as one from YourMechanic, who will...
2016 Nissan Altima 2.5SV Brake lights are stuck on even when car is not running. How do I fixed this before my battery dies?
The most likely cause is the brake light switch (https://www.yourmechanic.com/services/brake-light-switch-replacement). It either has an internal short or it has detached from the brake pedal. Being that your vehicle is still under warranty, it should be replaced at no charge. For...
Gas gauge isn't working. Sometimes the speedometer and the temperature gauge doesn't work. Limited lights around gauges and radio.
Hi There, It sounds like you have a faulty instrument cluster voltage regulator (https://www.yourmechanic.com/services/instrument-voltage-regulator-replacement) that may be causing the weak power source to the dash lights. The instrument voltage regulator regulates the voltage supplied to the various gauges in your...
my Malibu smells like it's burning and when I lift the hood and press the gas it sounds extremely loud
Hello, thank you for writing in. The vehicle may be having several different issues. To begin diagnosing it, you will want to check the fluid levels to find out what is burning. From there you want to know how the...

Related articles

A Buyer’s Guide to the 2012 Ford Taurus
The The Ford Taurus received something of a revival over the past several years, and it has become one of the family sedan staples in the United States. It’s a beautiful and bold looking vehicle that offers a wealth of...
How to Find the Keyless Code on a Ford Explorer or Mercury Mountaineer
Many Many Ford Explorers and Mercury Mountaineers were manufactured with an option known as the Ford keyless entry keypad. Some models refer to it as SecuriCode as well. It is a five-button numeric keypad that is used to: Eliminate fumbling...
Ford Certified Pre-Owned (CPO) Car Program
Drivers Drivers in the market for a used Ford vehicle may want to check out cars under their certified pre-owned program. Many manufacturers have a certified pre-owned (CPO) program, and each one is set up differently. Read on to learn...