Q: I have a 2005 Dodge Ram 2500 Cummins engine automatic trans. Wanted to park and the transmission stayed in Neutral. But the shifte

The Front Camera Blocked, Clean Windshield message can appear in the driver information center (DIC). When the DIC displays this alert, it means that the front camera sensor is blocked, and both the Lane Departure Warning (LDW) and Forward Collision...

Just because the horn still works doesn't mean your battery has enough "juice" to turn over the engine. I suggest you have a qualified technician test your starting and charging system. (https://www.yourmechanic.com/services/car-is-not-starting-inspection) Since your vehicle won't start, calling YourMechanic would...

Hello and thank you for your question. If your 2005 Chevrolet Silverado 1500 is shifting the transmission or transfer case into neutral, then there may be a problem with the shifter on the column or floor if you have a...

The first thing to come to mind is the quality (https://www.yourmechanic.com/article/how-to-buy-a-good-quality-fuel-pump) of your replacement pumps. There are many manufacturers in the business of making inferior pumps and selling them for a tempting price. These are often what you get at...

Hello - it is unlikely a bad intake manifold gasket will cause a blown head gasket (https://www.yourmechanic.com/question/head-gasket-blown) on a Prius (different story for GM V6 engines). It is possible that a failing head gasket can cause a misfire over time...

It is possible that your alternator could be failing. When an alternator fails, it can cause other electroncis on the vehicle to malfunction. I would recommend starting by checking the charge output of the alternator using a digital multimeter. If...

Hello. There is no time frame to change these parts on your vehicle. The timing chain is not a wear part and the water pump only gets changed when it is leaking. Most of these water pumps last about 100,000...

Hi Marie: With regard to the code P1372 that was downloaded, there are many potential malfunctions that will cause P1372 to set in addition to the crankshaft position sensor itself being faulty. And, if the sensor itself is suspected as...