Q: I accidentally put engine oil in coolant reservoir, what should I do?

asked by on

This morning I accidentally put motor oil in my coolant reservoir. I haven't started my car or moved it since. what should I do?

My car has 92200 miles.
My car has an automatic transmission.

You should suck out the coolant reservoir since the oil will float on the water it will stay near the top. You can use a siphon to get oil or majority of oil out.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: I accidentally put engine oil in coolant reservoir, what should I do?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Car won't go into reverse.

The manual transmission on these vehicles had a bad reverse gear design and was very prone to failure after getting worn. The transmission reverse gears do not engage enough in these transmissions and after the gear wears will not engage...

Q: Why is my engine light on in my 2008 VW Jetta

Hi there. If the check engine light came on for the gas cap and then for the fuel pump, either there is an electrical issue around the fuel tank causing the fuel pump to have a intermittent issue, or the...

Q: Gas smell when car turned off. No leaks or anything 2010 BMW 328i

It sounds like you may have a leak in the fuel tank ventilation system that may be causing the fumes to escape from the fuel tank. This can happen when the venting tubes in the fuel tank are leaking or...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.