Q: how much should an ignition coil or ignition cost w parts and labor for a 1988 olsmobile 98 regency engine is a 3.8

Cracked hoses are unsafe (https://www.yourmechanic.com/article/can-cracked-hoses-be-repaired-or-do-they-need-to-be-replaced) for the proper operation of your vehicle and should be replaced at your earliest convenience. There is no way to repair a worn hose, nor would you want to. Hoses are designed to transfer engine...

The supplemental restraint system (SRS) is designed to help keep you and your passengers safer during certain collisions. If the Supplemental Air Bag light is on in the dash, it indicates a problem with the system. The light should turn...

Hi there. Since your issue is intermittent this would lead me to believe you are experiencing a bad connection behind your dashboard. A loose connection between your light bulbs and sockets will cause this problem along with a fault in...

The GM seat belts of your generation vehicle have widespread problems with the seat belt ratcheting device. The seat belts have a safety feature which is designed to stop seat belt movement during emergency braking. The safety feature is however...

Hi there. The DPF apparently was not installed in all markets, which may cause issues if the vehicle did not have it when manufactured, but is transported and sold into a market which does require it. I would check with...

Hey there. You will need mostly basic hand tools - a ratchet, sockets, wrenches, pliers, screw drivers. The only problem you might run into is bleeding the cooling system (https://www.yourmechanic.com/services/cooling-system-flush) of air after performing the replacement. Since this radiator does...

Hello there, a variety of faults will cause your 2001 Nissan Sentra to overheat, be low on coolant, and now have starting trouble. The first problem is the vehicle being low on coolant (https://www.yourmechanic.com/services/top-off-coolant), either there is a leak in...

Hi there: In most newer trucks, like your 2014 Ram, if an error light is triggered and the repairs are made, you'll have to clear those stored error codes in the ECU with a digital scanner or they will stay...

Hello. A misfire can be caused by a number of things. Depending on what they found to be the problem it is quite possible that this is an accurate estimate. Most of the time this is caused by a failure...