Q: How do you use the remote to lock the doors?

asked by on December 14, 2015

How do you use the remote to lock the doors?

You don’t have to use the auto functionality of your Intelligent Key to lock the doors. You can use the remote to do so. Here’s how:

  1. Make sure the car is in park.

  2. Make sure the ignition is off (set to lock).

  3. Make sure all the doors and the trunk are closed.

  4. Press the lock button on the remote.

  5. All the doors should lock.

  6. Watch for the hazard lights to flash twice and listen for the horn to honk.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

What others are asking

knocking noise coming from transmission

Hi there. It is more than likely that you have either a damaged CV joint or axle, especially if you hit a curb. If you are going to remove everything, I would recommend inspecting the inner CV axle shaft input...

How do I lock the doors with the wireless remote control

Your vehicle can be locked with the wireless remote control system, so that you don’t have to use a key. To lock the doors, press the lock button (an image of a closed padlock) on your wireless remote, when within...

output shaft speed sensor

Hey, again Brandon. Yes, the output shaft speed sensor is located on the driver side, on the outside of the front differential.

What is the break-in period?

Like all other cars on the market, the Ford Fusion requires a break-in period when purchased new. This is a relatively short period during which you need to drive under certain conditions and avoid some types of behavior in order...

How do I adjust the volume limiter?

When the volume limiter feature is turned on, the volume of the sound system will be limited to a safe volume. To turn this feature on or off, follow these steps: 1. Press the Up/Down buttons on the steering wheel...

Where are the fuses located in a 2012 Nissan Altima?

If one of the electronic components in your car doesn’t work, the first thing to check is the fuse. Fuses act as protectors – if high voltage surges through the circuit, the fuse blows. This prevents damage from occurring to...

What does the maintenance required Warning Light mean?

The maintenance required Warning Light is located on the instrument panel. When this light illuminates, then the vehicle is due for schedule maintenance based on the miles that have been driven since the last maintenance. Tip Like all warning lights,...

How do I adjust the security relock timer?

For security purposes, your car will relock if you unlock it but never open the door. For instance, if you unlock your vehicle with the keyless remote and then change your mind and go back inside without remembering to lock...

How do I make a call with a number?

Making a call with a paired phone is very easy: 1. Press the Phone Send button. 2. Following the tone, say “Call”. 3. Following the prompt, say “Phone Number”. If the number you wish to call is more than 10...

Related articles

How to Replace an Interior Car Door Handle
The inside handles on car doors fail when the handles come loose or when the doors are either hard to open or will not open at all.
The Top 5 Selling Cars in Alabama in 2012
2012 2012 was a great year in Alabama for auto manufacturing, but that wasn’t the only bright spot. Vehicle sales in Alabama were also robust in 2012. Nothing much changed in terms of the vehicle types that were most popular...
Is a Keyless Push-Button Ignition More Reliable?
Vehicle Vehicle starting systems have evolved significantly since their inception. When automobiles were initially introduced, you had to manually crank the engine over with a handle on the front of your engine compartment. The next phase involved a lock and...