Q: Q: How do you lock the glove box?

asked by on

How do you lock the glove box?

Securing your glove box is important. You can easily lock the glove box with your master key. Just insert the key into the lock on the handle and turn it to the right. To unlock the glove box, turn the key to the left. Pull the handle outward to open the glove box.

Tip

Only the master keys will lock and unlock the glove box. The valet key will not.

Never drive with the glove box open, as it can injure a passenger in the front seat during an accident.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: How do you lock the glove box?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How to install a child seat without the LATCH (Lower Anchors and Tethers for CHildren) system?

Installing a non-LATCH equipped car seat in your car is very easy. Here’s what you’ll need to do: Place the child seat in the car in the position where you want the child to ride. Route the seat belt...

Q: Bad Ignition/electrical issue - takes several cranks before it starts!

Hello there, you have a few different faults going on with your 2007 Chevrolet Impala. A vehicle should not have to crank long before it starts unless there is a fault. Given the codes you have listed there are a...

Q: Misfire codes and no-start. What could it be?

Fault codes for P0300, P0301, P0302, etc. indicate misfires. P0301 would indicate cylinder #1 misfiring, P0302 would indicate cylinder #2 misfiring,etc. Code P2159 has to do with the VTEC system malfunction. If all this started after the timing belt replacement,...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.