Q: Q: How do I turn on the cargo light?

asked by on

How do I turn on the cargo light?

The cargo light provides extra light to your trunk area. To turn on the cargo light, press the Cargo Light switch, directly next to the light. Press the switch again to turn off the light. Tips If the trunk is opened when the vehicle is running, the cargo light will automatically come on.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: How do I turn on the cargo light?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: I changed the battery and alternator but for some reason the battery isn't charging what could be the issue

Check the fuse 65 in the main engine fuse box, it is a 7.5 amp fuse. Then check the main fuse A, a 120amp fuse. If both of these fuses are good then you will have to check them for...

Q: Why Doesn't My Brake lights Work And I Changed The Brake light Switch

Hi there. It sounds like you may have either a blown fuse or a broken wire. Check and replace the fuses/relays as necessary. It may be necessary to check for battery voltage with a digital volt/ohm meter at the brake...

Q: How do I jump start the battery in a 2012 Honda Accord?

If the battery in your Accord is dead, you’ll need a jump to get running once more (and then you’ll probably want to get the battery replaced, or at least have the charging system checked). To jump your battery, follow...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.