Skip the auto shop - Our mechanics make house calls

Q: How do I tilt the steering column?

asked by on

How do I tilt the steering column?

A: Steering your truck is supposed to be easy ...

Steering your truck is supposed to be easy and comfortable. If at any point, you are uncomfortable in steering your vehicle, you can adjust the tilt on the steering column. To adjust the tilt.

  1. Pull down the lever on the steering column.

  2. Push the steering wheel up or down until it is in the position that you want it in.

  3. You can also pull the steering wheel back and forth to bring it closer to you.

  4. Push the lever on the steering column back up to lock it in place.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: What does the traction control system/StabiliTrack light mean in a 2012 Chevrolet Cruze?

The traction control system (TCS)/StabiliTrack Warning Light is located on the instrument cluster. The TCS/StabiliTrack Warning Light is illuminated when the TCS and/or StabiliTrack systems are not functioning properly, or have been disabled. If the TCS/StabiliTrack Warning Light is flashing,...

Q: The shift gear is loose and wont change in to park

The most common cause of the problem is a broken shift tube in the steering column is not moving the shift cable. You need to have a mechanic like one from YourMechanic remove steering column covers and inspect shift tube...

Q: Replaced cam shaft P sensor. Less than 2 weeks. Now its bad again. What else could i replace before i buy another sensor?

First I would make sure you replaced the cam sensor on the driver's side of the engine. This is bank 2. Now you have a noise in the motor, and it is rattling and running rough. I would point you...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the P0052 code means This code is seen when the Engine Control Module (ECM) tries to control the...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.