Skip the auto shop - Our mechanics make house calls

Q: How do I set drive lock mode?

asked by on

How do I set drive lock mode?

A: When your vehicle is in drive lock mode, al...

When your vehicle is in drive lock mode, all of the doors and the trunk will automatically lock when your vehicle reaches a speed of roughly 10mph. You can manually set drive lock mode with a few easy steps: 1. Engage the parking brake. 2. Depress the brake pedal, and hold it down. 3. Shift the car out of P, into any other setting. 4. Close the driver’s door if it is not already closed. 5. Turn the ignition to On. 6. Press the lock button on the master door lock switch (located on the driver’s door), and hold until you hear two clicks. This should take at least five seconds. 7. Turn the ignition to ACC. This step will need to be done within 20 seconds of step 6.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Where are the jack and the emergency tools located?

All of the emergency tools, and the jack, are located under the front passenger seat. To access the emergency tools, use your hands to remove the plastic cover at the base of the passenger seat. Then, pull out the jack...

Q: How do I scan CDs and MP3s?

The CD player has a scanning feature that allows you to listen to 10-second samples of all the available songs. To use this feature, press the Scan button. After playing 10 seconds of the first song, it will skip to...

Q: What does the AdvanceTrac® light mean on the dash?

Your car is equipped with an Advanced Traction and Stability Control system called AdvanceTrac®. If the AdvanceTrac® light comes on in your dash, it means one of two things: It comes on when you first crank the engine while...

Related articles

What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.