Q: How do I open and close the power sunroof?

asked by on

How do I open and close the power sunroof?

The power sunroof button is located on the overhead console. It sits between the two reading lights. To open the sunroof, press the switch towards the rear of the car, and hold it. The sunroof will continue to open until you let go; if you let go when the sunroof is only partially open, it will stay partially open. To close the sunroof, push the switch towards the front of the car until the sunroof is entirely closed.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I open and close the power sunroof?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: 2013 explorer sunroof won't close. The fuse is ok, no motor noise

You may have a defective sunroof motor or the track is binding but you should have the body computer scanned to see if the sunroof motor is being activated when switch is pushed. You may have a defective switch. ...

Q: How do I remove windshield reservoir on my 2012 Mitsubishi Lancer.

Hi there. There are 3 bolts that secure the windshield washer reservoir on the car. There is one bolt on the inner fender and the others are on the outer fender. A small socket and wrench set will remove the...

Q: How do I adjust the trailer towing mirrors?

Your car may be equipped with trailer towing mirrors that give you better visibility when you are towing long or wide loads. To put your mirrors in trailer towing mode, hold them with your hands, and rotate them counter-clockwise, such...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.