Q: Q: How do I open and close the moonroof?

asked by on

How do I open and close the moonroof?

The moonroof is controlled by the power moonroof switch, which is on the ceiling, next to the moonroof. To open the moonroof, pull back on the power moonroof switch until the moonroof opens fully. You can let go of the switch at any point to stop the moonroof. To close it, push the power moonroof switch forward until the moonroof closes fully. You can let go of the switch at any point to stop the moonroof.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: How do I open and close the moonroof?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Belt size for an A/C bypass?

To bypass the compressor pulley, you'll need a belt that is approximately 54 inches long, however you may have to experiment at the store and possibly go an inch over so that you can install it without too much trouble....

Q: How do I tilt the moonroof?

The moonroof can be tilted to let in a little bit of fresh air. To tilt the moonroof, press the center of the power moonroof switch (located next to the moonroof). Press the center of the switch a second time...

Q: Sunroof not closing all the way

Hi. Sometimes debris lands inside the track and can cause similar complications. If thats not the case, a certified mechanic from YourMechanic can inspect the sunroof system. It can be a switch problem or the sunroof module just needs to...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...