Q: How do I erase the personal entry codes?

asked by on

How do I erase the personal entry codes?

All the personal entry codes can be erased quickly, by following these steps: 1. Enter the factory set entry code, which is located on the owner’s wallet card. 2. Within five seconds, press and release the 1-2 button. 3. Within five seconds, press the 1-2 button again, and hold for two seconds.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I erase the personal entry codes?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I arm the anti-theft system?

Arming the anti-theft system is very easy. All you have to do is lock the vehicle with the remote keyless entry (RKE) transmitter. 30 seconds after the RKE transmitter has locked the vehicle, the anti-theft alarm system will be armed....

Q: My coolant is boiling out of my overflow tank.

This is most likely the result of a failing fan switch relay or a failed thermostat. The thermostat is a component that regulates the flow of coolant through the motor based upon specific temperatures. When the engine reaches a certain...

Q: Q: What does the turn signal light mean?

There are lights that indicate the function of the Turn Signals located on the dashboard. The Turn Signal Light is displayed by two left and right arrows. To understand the Turn Signal Light. When the left or right turn...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...