Q: How do I detach the rear seat belt comfort guide?

asked by on

How do I detach the rear seat belt comfort guide?

The rear seat belt comfort guide is easy to detach. All you need to do is pinch the seat belt, and slide it out of the guide. Then return the guide to the storage compartment on the side of the seat.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1,000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I detach the rear seat belt comfort guide?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: My car has temperature issues; Either the engine is under temperature or overheating.

Hi there. If the coolant reservoir is bubbling before the coolant is hot and before the engine begins to overheat, then there could be an issue with the head gasket. If there is a combustion gas leak in the cylinder...

Q: How do I empty the ashtray?

The ashtray can be removed from the front console cupholders so that you can empty it out and clean it. To remove the ashtray, turn the upper part counterclockwise, until it begins to release, and then pull it out. Empty...

Q: How do I buckle a seat belt?

Buckling the seat belt is very easy, and only takes a few steps: 1. Pull the seat belt out of the retractor. 2. Slowly pull the belt across your body. 3. Insert the latch plate into the buckle, until you...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.