Q: How do I delete a phone pairing on Uconnect?

asked by on

How do I delete a phone pairing on Uconnect?

There are many different reasons why you may want to delete a phone pairing from your Uconnect phone system. To do so is easy.

  1. Press the Uconnect phone button, which looks like a phone and is located on your steering wheel or center console.

  2. When the system prompts you, say “Setup phone pairing.”

  3. After another prompt, say “Delete.”

  4. Follow the Uconnect phone prompts, or press the phone button again and state the name of the phone pairing that you wish to delete.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I delete a phone pairing on Uconnect?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I delete or edit the contacts in the Uconnect phonebook of a 2012 Dodge Ram?

If you are editing a contact, press the Uconnect phone button, which is a telephone symbol on either the center console or the steering wheel. The system will say “Ready” and beep, at which point you should say “Phonebook...

Q: How do I check the level of the oil?

You should check your engine oil periodically, to be sure that you have a sufficient level. It is especially important to check your oil at the beginning and end of long drives. Checking your oil is easy: Park your...

Q: Low idle when stopped unless the a/c is on or i shift into neutral

Due to the change in load put on the motor when shifting into gear vs neutral and the change in load when the a/c is on vs not on, this may suggest you have a bad MAP sensor. Both of...

Related articles

What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.