Q: Q: How do I create a MyKey?

asked by on

How do I create a MyKey?

You can create a MyKey with just a few steps: 1. Press the Up/Down buttons on the steering wheel until Settings is displayed on the instrument panel, then press the OK button. 2. Press the Up/Down buttons until MyKey is displayed, then press the OK button. 3. Press the Up/Down buttons until Create MyKey is displayed, then press the OK button. 4. Press and hold the OK button to create a MyKey.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: How do I create a MyKey?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Engine fan non-stop running until you turn the ignition key off

A P2184 code indicates temp sensor circuit low. That means the voltage that the ECU reads on the temp sensor is low. The ECU interprets this as a hot engine and turns on the fan. A short circuit in the...

Q: Starts but wont move or rev up after replacing battery 2005 Ford Explorer

Hi there - your symptoms suggest a problem with the throttle position sensor. Check for problem codes - whether the Check Engine light is on or not - I would expect some indication of a problem here. Changing the battery...

Q: How do I turn quiet start on or off?

When your car is started via the remote start button, the horn will honk to confirm that the vehicle has been started. When the quiet start feature is turned on, the horn will not honk, and the climate control fan...

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...