Q: Q: How do I clean the rearview mirror?

asked by on

How do I clean the rearview mirror?

The rearview mirror can be damaged easily, so glass cleaner should never be applied directly to it. Instead, you should wash the rearview mirror with a very soft towel that has been dampened with water.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: How do I clean the rearview mirror?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: When backing up, my car makes a rocking noise.

The noise is the parking brakes are out of adjustment and the brakes are dragging. Check the rear brakes and see if they are releasing when going in reverse. If you need further assistance with your brake system, then seek...

Q: Interlock is installed but the car won't start and the ECM is fried. Can the interlock damage the ECM?

Hello. Though the shift interlocking system does have an input from the ECM, I have never seen one fail and cause this. Most of the time, this is caused by a bad brake pedal switch or a shift lock solenoid....

Q: My Kia Forte is making a grinding knocking noise when I put it in drive and accelerate and at about 5 mph and up it goes away unti

Hello. Exhaust systems can make a variety of sounds that we would not intuitively expect. When I was first learning about exhaust systems I was surprised to find out how dynamic they can be. I am assuming you are speaking...

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.