Skip the auto shop - Our mechanics make house calls

Q: How do I choose which phone Uconnect uses?

asked by on

How do I choose which phone Uconnect uses?

A: The Uconnect system can pair with up to sev...

The Uconnect system can pair with up to seven different cell phones. When you pair the system with a phone, you have to prioritize the phone, so that the system knows which mobile device to use if multiple devices are in the car. If you have two or more phones in the car and want to make a phone call with a device that isn’t the highest priority, you can instruct the Uconnect system to use a different phone. To do so, press the Uconnect phone button, which looks like a phone, and is located on your steering wheel or center console. After the system says “Ready” and beeps, say “Setup select phone.” Then follow the prompts to choose which phone to use.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Save up to 30%

Get a quote

What others are asking

Q: How do I use the ignition?

The ignition has four different settings: Off, Acc/Accessory, On/Run, and Start. When turned to Acc/Accessory, many of the electrical components in the car will work. When turned to On/Run, the car will turn on, but not the engine. When turned...

Q: How do I adjust the trailer towing mirrors?

Your car may be equipped with trailer towing mirrors that give you better visibility when you are towing long or wide loads. To put your mirrors in trailer towing mode, hold them with your hands, and rotate them counter-clockwise, such...

Q: P0306 code after replacing COP, wires and spark plugs. What else could it be?

There are several possible causes for an engine misfire. There could be an injector problem, a wiring or connector problem, a PCM problem, or even a problem within the engine. Some further diagnostics will be necessary to locate the cause....

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.