Skip the auto shop - Our mechanics make house calls

Q: How do I adjust the traction control?

asked by on

How do I adjust the traction control?

A: The traction control has two settings: alwa...

The traction control has two settings: always on, and user selectable. When set to always on, the traction control will remain on at all times. When set to user selectable, the traction control will stay on until the Traction Control Off button is pressed. To choose these settings, follow these steps: 1. Press the Up/Down buttons on the steering wheel until Settings is displayed, then press the OK button. 2. Press the Up/Down buttons until MyKey is displayed, then press the OK button. 3. Press the Up/Down buttons until Traction Control is displayed, then press the OK button. 4. Select Always On or User Selectable.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Leaking radiator

This is a very common problem with the Ford Explorer. The plastic tanks on the radiators will crack or the seal will leak. The intake manifolds on some years of Explorer's engines also can leak from the manifold or thermostat....

Q: What kind of fuel should I use?

You should use “regular” unleaded fuel with an octane rating of 87.

Q: What should I know about using the electronic compass?

If your car is equipped with an electronic compass, you’ll find it displayed in the center information console (note: this is not available on all Fusions). It provides handy direction information, but there are a few things you should know:...

Related articles

Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.