Q: How do I adjust the rear seat?

asked by on

How do I adjust the rear seat?

Like the front seats, the rear seats can be adjusted to move forward or move backward. However, the rear seats cannot be adjusted separately, but only as a unit. Here’s how: 1. Locate the release bar, which is located under the front of the rear seat cushion. Lift and hold the release bar. 2. Slide the seat forward or backward into the desired position. 3. Release the release bar to lock the seat into place. 4. Try and move the seat to make sure that it is firmly secured.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I adjust the rear seat?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Q: What does the Traction Control Off message mean?

The Traction Control Off message comes on the driver information center (DIC) when the traction control system (TCS) has been turned off. When the TCS is turned on again, the DIC alert will disappear.

Q: How do I use the rear side seat belt hooks?

The rear side seat belts can be stored along the door to keep them out of the way when you fold down the rear seats. To do this, simply hook the rear outer seat belts to the hooks below the...

Q: Dashboard lights out and something draining new battery

Hello there, thank you for asking about your 1957 Chevrolet Bel Air. Checking for parasitic draw on a battery can be done by inserting an ammeter in series with the negative battery cable, then removing the fuses one by one...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.