Q: Q: How do I adjust the clock?

asked by on

How do I adjust the clock?

The clock is located at the top of the center console, and is very easy to adjust:

  1. Turn the ignition to ACC or On.

  2. Press the button to the left of the clock until the hour is set correctly.

  3. Press the button to the right of the clock until the minute is set correctly.

Tip

When the battery is disconnected or replaced, the clock will be reset.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: How do I adjust the clock?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Q: How do I delete a paired phone?

If you are no longer going to use a phone with the Bluetooth system, you should delete the pairing. To do so only takes a few steps: 1. Press the Setup button. 2. Rotate the Tune-Scroll knob to Bluetooth, then...

Q: Why does my front blower motor not work on my 2013 Toyota Highlander

Hello. If the blower motor is not working it is typically caused by an issue with the resistor, though it can be the motor itself. I usually check to see if the motor is getting power. If it is getting...

Q: How do I use grade assist?

The grade assist feature helps control your engine and transmission when driving on a steep grade, so that you don’t put too much stress on the transmission or the brakes. To turn on the grade assist, press the Grade Assist...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...