Q: How do I adjust the autolamp delay?

asked by on

How do I adjust the autolamp delay?

The autolamp delay is the amount of time that your lights stay on after exiting your vehicle. This delay can be adjusted with just a few steps: 1. Press the Up/Down buttons on the steering wheel until Settings is displayed on the instrument panel, then press the OK button. 2. Press the Up/Down buttons until Convenience is displayed, then press the OK button. 3. Press the Up/Down buttons until Autolamp Delay is displayed, then press the OK button. 4. Select Off, or the amount of seconds you would like the delay to last.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I adjust the autolamp delay?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: The dome light will not turn off.

Hello. Thanks for writing in. There is typically a switch on the dashboard next to the headlight controls in which will turn on the interior lights. To start, locate this switch and make sure it is off. It may have...

Q: Problem with AC/heater - 2005 Ford Explorer

Hello. The problems you describe with the front system may either be a faulty control switch or faulty vacuum motors for the air blend doors. The problem in the rear is likely the rear heater control valve, which regulates the...

Q: Where is the tpms ecu module located so I can replace?

Hello, thank you for writing in. The TPMS module is located behind the left front wheel well. Beyond the wheel well you will need to locate the first body frame mount, and the module should be fastened to it or...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.