Q: Fuel or ignition problem.

asked by on

I am having either a fuel or ignition problem.

If your complaint is a crank no start, it is likely that you have ignition problems. It could also be the fuel injection relay. The most likely cause for your no start is an ignition module in the distributor assembly. The most common fix is to replace the distributor assembly with a remanufactured one. I would recommend you have a qualified technician come and confirm what your ’no start’ problem is.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Fuel or ignition problem.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Q: Serpentine Belt

It is recommended to replace the timing belt at 100k miles and the water pump and tensioner should be replaced at that time also. Do not confuse the timing belt from the accessory drive serpentine belt. The timing belt is...

Q: Cat back with h22a4 resulted in some power loss .

Hello, thanks for writing in. When you upgrade the exhaust size to that extent, you create further issues with the power supply. Now you should turn your attention to increasing the amount of airflow into the engine. This may mean...

Q: It seems like the engine isn't receiving fuel properly.

Hey there. It is possible that there is a weak fuel pump issue, but there are several possible problems that can cause an engine to misfire. There could be a faulty ignition coil, a bad fuel injector, clogged fuel filter,...

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
How Much Does a Mechanic Make in Vermont?
Automotive technician jobs in Vermont have an average mechanic salary of $37k, with some mechanics earning a salary of $53k.