Q: Fuel line is clogged

Hello, the first thing to check on any car that has a transmission dipstick is to check the transmission level (https://www.yourmechanic.com/services/transmission-fluid-is-leaking-inspection). If the transmission level is too low, the transmission won't engage in any gear. In a situation like this,...

Hi. As coolant is burned through the combustion chamber, it travels through the exhaust which can damage your catalytic converter. This will lead to the clogging of your exhaust and can cause different problems with your vehicle. If you need...

The BCM would need to be tested to see if it is getting the proper signals from the headlight switch (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-headlight-switch) and turn signal switch (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-turn-signal-switch). The BCM is a major problem and and has caused various problems with the...

This may be related to a faulty or dirty mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement). The mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) is a unit in the intake system that monitors air intake as it is mixed with fuel prior to being...

This should be a double filament bulb, which has two filaments inside. One works for the main tail light and the other is activated when the brake light switch is activated. Many times, one or both of these filaments will...

In order to get the reset the ECM and get the check engine light to turn off I would recommend having a check engine light inspection (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection) having a mechanic like one from YourMechanic come to you and scan the...

Hi there: In most cases, the symptoms you're describing are caused by problems with tires, suspension components or the steering rack. When you shift into a different gear during acceleration, the suspension and tires must work together to ensure the...

Hi there. Check the engine oil pressure. When the oil is cold, it is thick and when its warm its thinned out. If the oil pressure drops lower than 25 psi, then the variable valve timing solenoids will not work....

Typically, when you have a passenger seat warning light on, there will be diagnostic warning codes associated with it, that can be pulled using a diagnostic scan tool. Normally, they will show that there is a problem with a seat...