Skip the auto shop - Our mechanics make house calls

Q: Fuel injectors misfiring

asked by on

Fuel injector two and seven are misfiring.

A: Hello. If you are getting codes for the inj...

Hello. If you are getting codes for the injectors themselves then they may be electrically failing and in need of replacement. I would typically check their resistance with an ohm meter to verify if they are bad, as a bad connector can cause this also. If the codes are for a misfire on those cylinders, then it may not be the injectors. The spark plugs should also be checked and replaced if needed. If the injectors, spark plugs, and coils are good then a compression test should be done to make sure that the engine does not have an internal failure. If you plan on having this inspected, consider YourMechanic, as a certified mechanic can come to your home or office to diagnose your misfiring issue and replace your fuel injector if needed.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Misfiring

Th wrench light is your car' check engine light indicating that it needs to be serviced. Engine misfires can be caused by many different problems and are generally caused by either a spark or fuel issue or in some cases,...

Q: Clutch won't go into gear

Having difficulty moving into first gear and then being unable to move your Subaru into any other gear leads me to believe that there are problems with one or more components in the clutch system. While the information you offered...

Q: I have to manually open the throttle plate to start my truck. What causes the throttle plate to stay closed?

This suggests you may have a bad throttle control actuator. This is a module near the intake that operates the opening and closing of the throttle plate. This works in conjunction with the throttle position sensor which monitors your gas...

Related articles

Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
How Much Does a Mechanic Make in Vermont?
Automotive technician jobs in Vermont have an average mechanic salary of $37k, with some mechanics earning a salary of $53k.