Q: Q: Front end shaking.

asked by on

The front end shakes when braking and shakes a little when driving as well. Was told it could be the wheel bearings.

The shakes can be the front wheel bearings loose and the front brake rotors warped. The vehicle front end has to be lifted and bearings checked. The rotors will only cause the shake when stoping. You will need to have the bearings checked and replaced as needed and then road tested for warped rotors.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: Front end shaking.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Car wont accelerate t.c light

The reason you are seeing the traction control warning light continuously is there is a fault somewhere in the complex sensor system that makes the system work by regulating the engine's output and selectively applying braking. There are wheel speed...

Q: Are the wheel bearings in the 98 lincoln navigator pressed in?

Hello. We will be happy to answer your question. The wheel bearings on a Lincoln Navigator are pressed down but not pressed in in the fashion that you may think. They can be removed by hand but you will have...

Q: Metal noise when turning left.

The noise over bumps could be related to the steering rack or mounts. You have already replaced everything else. As for the screeching noise, there is a chance that the brake dust shield is rubbing the rotor The shields...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...