Q: Exhaust question

The brake fluid is necessary for the brakes to function correctly. Locate the tank that holds the brake fluid which is located on the back left side of the car under the hood. On the side of the tank, you’ll...

When the check fuel cap alert shows up on the information display, it means that the fuel cap has not been properly tightened. When the cap is secured correctly, the alert will disappear.

This is a common problem in many of the Chrysler model cars. I would suggest taking it to the dealer to have the security system reset. The fact that this happened when turning on the defrost suggests a potential short...

When you say you had to keep giving it gas to keep from stalling, I'm thinking the idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) there. You can clean the throttle body (https://www.yourmechanic.com/services/clean-throttle-body), the valve, and adjust the linkage, but the idle air...

Hello, There are many things that could cause your vehicle to lose power as you describe, however what you are describing sounds like potentially a failing ignition coil. A failing ignition coil will often times produce a symptom as you...

Hi there. If your engine is stalling out on you and the shop has said that the issue is your ignition coils, try checking the coils and see if there is a spark coming out of them by removing the...

There is inadequate coolant flow or, less likely, a leak at the head gasket. Remote possibilities include dragging brakes, under inflated tires, and transmission faults. Inadequate coolant flow can be due to a low coolant level, a faulty thermostat, a...

You have to turn it to on all the way to count as a key on cycle and then back to off for one key cycle.

You should replace the clutch slave cylinder as it incorporates the release bearing. The release bearing is the part that gets worn and may fail in a short time if you decide to not replace it. Even if the slave...