Q: exchanging a trans on a 01 325i do you need to reprogram the computer
I put a used transmission in and it wont go, when you put it in reverse it soon pops out then when you put it in drive it than soon pops out but it will go but sounds like slipping. has a code 59 - controlled slip
My car has 180000 miles.
My car has an automatic transmission.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Need a diagnostic.
Most shops charge an hour of labor for a diagnostic. The price for this hour of labor can range anywhere from $90.00 up to $120.00. If you have your diagnostic performed by a technician from YourMechanic you can get this...
What does the immobilizer light mean?
When your engine is turned on, the immobilizer light should briefly turn on. This lets you know that the security system is working; if the immobilizer light does not briefly come on, the system is not functioning properly. If the...
Heater not working
There are several reasons for a heater not to work. This could definitely be a problem with the heater's core or a valve, as you mentioned. It could also be something related to a blown fuse, a bad water pump,...
POS Altima
These engines are known to have the timing chains stretch or jump time and cause hard starting issues like you are describing. Especially given the mileage, there is a good possibility that the timing chain may be your problem (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-timing-chain)....
Gas tank seal from the filler neck hose.
The nozzle I believe your are mentioning is the anti-siphon and roll-over check valve. It does not require a perfect seal to the tank. The rubber filler hose slides over it, sealing in fuel vapors. I hope this helps. Put...
My car shakes a little when I speed up more than 30 mph
Hi there. If your vehicle's steering wheel is vibrating at speeds more than 30 mph, it's possible that this is being caused by bad tire or wheel balance on the front end. Even if the tires or wheels are brand...
Luke warm heat from heater
This may be a thermostat issue where the thermostat is not closing at the right temperatures resulting in the coolant running continuously throughout the motor which does not allow the engine to reach normal operating temperature. As you may know,...
Reduced engine power and car shuts off
Hi there. If there is carbon build up on the valves in the engine then that can cause a rough running condition and even a check engine light but that will not usually cause the vehicle to stall. It sounds...
im working on a 2005 chrysler with a 2.7. i keep getting a p0016 timing misalignment. i have retimed it twice. changed the sensors
Try checking and updating the computer program with the latest calibration. There is a bulletin for P0340 and should cover P0016 also. If after reprogramming the PCM and then road test to see if code returns. There has been problems...
Related articles
How to Purchase a Pre-Owned BMW
BMW BMW offers a wide selection of luxury cars. In many circles, owning a BMW is a sign of success. While most balk at the price of a brand new BMC car, pre-owned models provide a viable alternative if you...
BMW Certified Pre-Owned (CPO) Car Program
Shopping Shopping for a used BMW vehicle often leads many drivers to consider certified pre-owned options. BMW is one of many manufacturers that have a certified pre-owned (CPO) program. Each car manufacturer structures their CPO program differently; read on to...
Top Automotive News & Stories: October 1-7
BMW i5 images leak, an ultra-lux Jeep, hydrogen-fueled Colorado ZH2, Fisker's electric future, record plug-in sales, NHTSA Road to Zero, and more.
Browse other content
Services
Maintenance