Q: Excessive noise from camshaft

asked by on

I am hearing excessive noise from the camshafts. They either need an adjustment or replaced.

The noise you are hearing are probably the lifters. Over time, they will start sticking and will make a ticking noise. I would recommend having a technician come out to inspect the noise to make sure what the issue is.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Excessive noise from camshaft

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: why wont my truck start? 2002 Chevy Trailblazer

Hello. If the car was running BEFORE you replaced all of these parts, the first thing to do is make sure that you have reconnected any wiring (harnesses, plugs, grounds) that you removed when you replaced the numerous items that...

Q: Why won't the starter motor engage and turn engine over. Also, the clutch pedal won't move and the clutch is partly engaged but slips.

If the clutch pedal is not moving and the clutch is partially applied, then the clutch release bearing may be damaged and the fork is jammed into the clutch forcing it to slip. For the no start condition on...

Q: Temperature guage fluctuating but car's not overheating

The sensor, gauge and wiring should be repaired if there is a reporting fault. The problem is if you leave it as is, you might not get adequate notice were actual overheating to occur at a future point. Overheating of...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.