Q: Engine mount replacement.

asked by on

I think my engine mounts need replacing. From what I can see, the passenger side has a crack and the front is loose. I am not sure which mount needs replacement.

From your description of loose and cracked mounts it sounds like both of the mounts in question should be replaced. However, I would recommend you have a certified mechanic inspect the condition of the mounts and replace any that are needed.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Engine mount replacement.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Squeaking/Whale like noise

This type of a noise is hard to place given the fact that it is random, but I would suggest checking to be sure your power steering pump has enough fluid in it as this could cause a whining noise...

Q: Braking causes steering wheel to vibrate

The front rotors are warped, most likely, but an inspection of your brakes and front suspension is a good idea to ensure that no other problems are present. You should have a thorough diagnostic inspection of the steering wheel vibration...

Q: My break is as if it is always being pressed on even when I don't touch it. What can cause this?

Hello. From what you've described, your car has a bad brake light switch. This switch is located on the brake pedal assembly under the dash. It starts to fail and in most cases the smallest amount of movement will allow...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...