how much does it cost to fix a transfer case?


how much does it cost to fix a transfer case? ...

how much does it cost to fix a transfer case?

Automotive Expert
Hello and thank you for using JustAnswer. My name is \*\*\*\*\* \*\*\*\*\* I will do my best to assist you. During this conversation you will be given an automated offer for a phone call. You may accept or decline that offer.I don’t personally offer this service so if you take this another tech may call. I’m sorry that you’re having trouble with your vehicle. I will do my best to help you resolve them. Please understand that I do not know your knowledge or capabilities so I may need to ask questions to find out basic information to help solve your specific problem. My aim is to give you the best service possible and to help you. If you have any questions or concerns, please don’t hesitate to let me know. Sometimes it may take a moment for me to respond because I may have to look up information about your concern, so please allow up to 10 minutes for a reply. I appreciate your patience and will provide responses as soon as possible. Whats the year make and model of the vehicle and are you looking to get a quote on a full replacement?

2006 dodge durango with hemi
Automotive Expert
With parts and labor your looking at 2200-2500 parts and labor installed, depending on the viability and labor costs in your area Thanks for using JustAnswer and letting me help you. I hope I provided what you needed. If you find more help is still needed, let me know by listing out any remaining questions you have on this concern. I hope the remainder of your day is well.

What others are asking

Water pump is squealing
The water pump may be the cause, but it may also be the tensioner and pulley. The belt would need to be removed, and water pump pulley, as well as all other pulleys, checked for binding or problems. I recommend...
Car is shaking while idling and leaking coolant
From what you have described it sounds like a coil or spark plug fault causing a misfire. With the coolant leak, the most common cause would be a coolant hose or the radiator leaking. The two may be caused by...
Replacement AC compressor labor cost
The AC may have a leak somewhere that is causing the AC to cycle on and off. The compressors on these vehicles are known to go bad and contaminate the entire system with compressor internal parts. The system will need...
I would like to know what can be causing my coolant to drain quickly to the point where i have to re fill it every 2 days no leaks
There is a leak (https://www.yourmechanic.com/article/how-to-diagnose-a-fluid-leak-by-mark-vallet) somewhere and if there is no leak, from an external source, then the engine is leaking internally. My recommendation is to have a coolant pressure test and a combustion leakage check on the radiator (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-radiator)....
follow up on steering vibration answered by Norman
This may be stating the obvious but, it never hurts to go over the basics such as wheel balance and suspension play. Make sure that your vehicle's suspension parts do not have any excess movement as this can cause vibration...
ENGINE RACING PROBLEM
Hi there. I'm actually very glad you asked this question. First and foremost, anytime an inquiry like yours comes in, we look at the common symptoms and attempt to provide a few broad scope systems or components that could be...
How many bushings are required for each control arm?
Hello - control arms (https://www.yourmechanic.com/article/how-to-buy-a-good-quality-control-arm-assembly) usually have 2 bushings, but sometimes only 1 - depends on the suspension design. If you could provide the year, make and model of the vehicle, and whether it is for the front or rear...
Need 3 motor mounts and spark plugs and wires how much how long? 2010 Volkswagon Routan
Sent to CS motor mount replacement service (3) spark plugs replacement service (6) ignition coils replacement service (6)
Scraping noise
Sometimes its easy to get the hardware in a little crooked when changing brake pads, that or a backing plate might have gotten bent. Take the car back to the guy who did your brakes, they should be happy to...