Q: Do yukons back brakes have rotors or hubs?

asked by on

I was just told my back breaks are crumbling and need new pads and rotors but someone else said there aren't rotors in the back only hubs I am just wanting to clarify

My car has 129000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Do yukons back brakes have rotors or hubs?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Q: Brakes squealing

This circumstance is not unusual and I suspect is often related to the use of non-OEM rotors and brake pads and also the failure to re-apply factory specified shims and/or appropriate anti-squeal compounds and lubricants. Unfortunately, once non-OEM parts and...

Q: Air conditioning is pretty much useless

The A/C indicator light blinking is an indication that the system is low on refrigerant or a defective pressure sensor or wiring issue. The way you described your problem is that it is an intermittent one. The fact that your...

Q: Codes P0171 and P0174

Codes P0171 and P0174 pertain to the engine running lean on both bank one, and bank two, meaning that both sides, or the complete engine, is running lean. The lean condition could be one of several possible causes. The intake...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...