Q: Code for fuel level sensor.

asked by on

I received a Code P0463 - Fuel Level Sensor "A" Circuit High. What does this mean?

This means that the sensor inside your fuel tank isn’t reading properly. This could mean faulty fuel gauge readings and could even leave you stranded without fuel. I suggest having a qualified technician, like one from YourMechanic to diagnose and repair the issue.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Code for fuel level sensor.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How Do Fuel Injectors Get Dirty?

The gasoline we buy at our local gas station may look golden-clean but, in truth, by the time it reaches the fuel injector, it has come into contact with impurities that will over time coat critical areas of the injector....

Q: Bad fuse or defective key lock causing ignition problems.

Hello, it sounds like you have already had the battery tested and it tested good. The next thing that needs to be checked is to see if the starter is turning the motor over. If it is then you need...

Q: Changing gears - 2009 Nissan Altima

Hello. There are a few common causes of this on your vehicle. Most of the time it is caused by an issue with the transmission fluid being old or contaminated or it may be a problem with one of the...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.