Can you lower my 2012 SS CAMARO using lowering blocks fro...


Can you lower my 2012 SS CAMARO using lowering blocks front & back? Mechanic's Assistant: Are you fixing your SS yourself? What have you tried so far? No, I want it done. ...

Can you lower my 2012 SS CAMARO using lowering blocks front & back? Mechanic's Assistant: Are you fixing your SS yourself? What have you tried so far? No, I want it done.

Automotive Expert
Hi there, Sorry to hear about all your car troubles. My Name is \*\*\*\*\* \*\*\*\*\* I am an ASE Master Tech here to assist you with your vehicle. Please understand I am not there with you, But I am here to help. Any information about what is going on is greatly appreciated. The system will ask for a phone call, Please let me know if you want this option as I am not always available to do so. Be aware that I am assisting many customers at the same time and will get back to you as quickly as I can but I cannot get answers immediately as I am not a computer. I like to research each answer before I get back to you to ensure that I give out the correct info. Thank you for understanding. For this vehicle you will want to purchase a lowering kit or find a shop that does this in your area. These newer Camaros will use lowering springs to lower the height of the vehicle. I would suggest having this installed and then an alignment performed to get all the angles back in spec. This way your vehicle will drive straight down the road after the replacement. This will increase your rides handling but will decrease the ride quality as a lowering kit will typically make the ride stiffer and more harsh. So if this does not sound like what you want I would avoid doing this. Here are a few kits that are for sale to lower your vehicles ride height. [https://www.summitracing.com/search/part-type/lowering-springs/year/2012/make/chevrolet/model/camaro/submodel/ss](https://www.summitracing.com/search/part-type/lowering-springs/year/2012/make/chevrolet/model/camaro/submodel/ss) [https://www.texas-speed.com/c-3369-lowering-springs-shocks.aspx](https://www.texas-speed.com/c-3369-lowering-springs-shocks.aspx) If you do not plan on doing this yourself I would suggest having the shop that is going to install this kit, order them for you as they will know what you want for height and what they are comfortable working with. I always shoot for a 5 start review. If you have any other questions or in need of any other help, please let me know. If you think my answer was not that of a 5 star rating please let me know what I can do to assist you further. I want to answer all concerns that you have about this issue. Tips are not required but greatly appreciated, I work hard to give you the best answer and appreciate the extra thank you on your side. Thank you for understanding and thank you for using Just Answer!

Know a good place in Jupiter Fl. to do it?

See above.
Automotive Expert
I can offer my assistance to find a location for this, Ill send over an offer for this now.

What others are asking

How do I use the remote keyless entry (RKE) system to unlock or lock my car?
Your remote keyless entry (RKE) transmitter has buttons to automatically lock and unlock your vehicle. The unlock button looks like an unbuckled padlock, and the lock button looks like a buckled padlock. When outside the vehicle, press the unlock button...
How to fix gear shifter
In many cases, this problem can be caused by a loose connection behind the instrument cluster. First, the fuses for the gear and information center displays must be checked. If the fuse (https://www.yourmechanic.com/services/fuse-replacement) did blow, there is a faulty component...
Battery is fine but car won't turn over?
Hello, thanks for writing in about your Ford Fiesta. You need to check to see if the clutch starter interlock switch is making contact. If the clutch switch (https://www.yourmechanic.com/services/clutch-switch-replacement) is bad then you need to have it replaced. If you're...
My car sounds like it has a bad wheel bearing with a loud banging sound coming from the back area.
Hello and thank you for contacting YourMechanic. The noise could be a loose spare tire or something in the trunk bouncing around. If not, then there could be a lubrication failure in the differential or a loose axle mount. It...
The blower motor does not turn on and the blower resistor starts smoking
A seized blower motor can be the cause. If the motor is seized and is drawing too much current, it can damage or burn the resistor as well as other electrical components in the heating/air conditioning system. Have a certified...
What's the cost of ownership for an Audi?
Unfortunately it is not easy to predict what any car will cost to maintain. Problems can pop up even with vehicles that have reputations for great reliability just as easily as "luxury" brands that may not be well known for...
When i shut off my car the heater blower keeps going with unit off and car off. 2006 Chevy Trailblazer
Hello - either the relay is stuck in the "On" position from burned contacts (,https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-blower-motor-relay) or the heater switch is similarly stuck in the "on" position (internal contacts at least). I would recommend an electrical inspection (https://www.yourmechanic.com/services/electrical-components-are-not-working-inspection) by a mobile,...
Hard start hot and cold. Fuel pump, or throttle body?
If the throttle body was causing a hard start, then the engine would run with a loss of power all the time. The hard start could be caused by either the fuel pump not holding the fuel in the lines...
Hi Patrick, I was told by my machanic when my engine light sparked in that I need a oxegen sensor, and said that it has to be fixe
Oxygen sensors are tested using an automotive scope or oscilloscope. In your circumstance, if there are more than 100,000 miles on the sensor, the sensor output should be verified on a scope. The mechanic should show you the output waveform...